home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Libris Britannia 4
/
science library(b).zip
/
science library(b)
/
PROGRAMM
/
PROGEDIT
/
1435B.ZIP
/
JOVE.MAN
< prev
next >
Wrap
Text File
|
1988-02-26
|
15KB
|
397 lines
JOVE(1) UNIX Programmer's Manual JOVE(1)
NAME
jove - an interactive display-oriented text editor
SYNOPSIS
jove [-d directory] [-w] [-t tag] [+n file] [-p file] [files]
jove -r
DESCRIPTION
JOVE is Jonathan's Own Version of Emacs. It is based on the
original EMACS editor written at MIT by Richard Stallman.
Although JOVE is meant to be compatible with EMACS, there
are some major differences between the two editors and you
shouldn't rely on their behaving identically.
JOVE works on any reasonable display terminal that is
described in the _t_e_r_m_c_a_p file (see TERMCAP(5) for more
details). When you start up JOVE, it checks to see whether
you have your _T_E_R_M environment variable set. On most sys-
tems that will automatically be set up for you, but if it's
not JOVE will ask you what kind of terminal you are using.
To avoid having to type this every time you run JOVE you can
set your _T_E_R_M environment variable yourself. How you do
this depends on which shell you are running. If you are
running the C Shell, as most of you are, you type
% setenv TERM _t_y_p_e
and with the Bourne Shell, you type
$ TERM= _t_y_p_e ; export TERM
where _t_y_p_e is the name of the kind of terminal you are using
(e.g., vt100). If neither of these works get somebody to
help you.
INVOKING JOVE
If you run JOVE with no arguments you will be placed in an
empty buffer, called _M_a_i_n. Otherwise, any arguments you sup-
ply are considered file names and each is "given" its own
buffer. Only the first file is actually read in--reading
other files is deferred until you actually try to use the
buffers they are attached to. This is for efficiency's
sake: most of the time, when you run JOVE on a big list of
files, you end up editing only a few of them.
The names of all of the files specified on the command line
are saved in a buffer, called *_m_i_n_i_b_u_f*. The mini-buffer is
a special JOVE buffer that is used when JOVE is prompting
for some input to many commands (for example, when JOVE is
prompting for a file name). When you are being prompted for
a file name, you can type C-N (that's Control-N) and C-P to
cycle through the list of files that were specified on the
Printed 2/24/88 12 February 1986 1
JOVE(1) UNIX Programmer's Manual JOVE(1)
command line. The file name will be inserted where you are
typing and then you can edit it as if you typed it in your-
self.
JOVE recognizes the following switches:
-_d The following argument is taken to be the name of the
current directory. This is for systems that don't have
a version of C shell that automatically maintains the
_C_W_D environment variable. If -_d is not specified on a
system without a modified C shell, JOVE will have to
figure out the current directory itself, and that can
be VERY slow. You can simulate the modified C shell by
putting the following lines in your C shell initializa-
tion file (.cshrc):
alias cd 'cd \!*; setenv CWD $cwd'
alias popd 'popd \!*; setenv CWD $cwd'
alias pushd 'pushd \!*; setenv CWD $cwd'
+_n Reads the file, designated by the following argument,
and positions point at the _n'_t_h line instead of the
(default) 1'st line. This can be specified more than
once but it doesn't make sense to use it twice on the
same file; in that case the second one wins.
-_p Parses the error messages in the file designated by the
following argument. The error messages are assumed to
be in a format similar to the C compiler, LINT, or GREP
output.
-_t Runs the _f_i_n_d-_t_a_g command on the following argument
(see ctags(1)).
-_w Divides the window in two. When this happens, either
the same file is displayed in both windows, or the
second file in the list is read in and displayed in its
window.
RECOVERING BUFFERS AFTER A CRASH
The -_r option of jove runs the JOVE recover program. Use
this when the system crashes, or JOVE crashes, or you
accidently get logged out while in JOVE. If there are any
buffers to be recovered, this will find them.
Recover looks for JOVE buffers that are left around and are
owned by you. (You cannot recover other peoples' buffers,
obviously.) If there were no buffers that were modified at
the time of the crash or there were but recover can't get
its hands on them, you will be informed with the message,
"There is nothing to recover." Otherwise, recover prints
the date and time of the version of the buffers it has, and
Printed 2/24/88 12 February 1986 2
JOVE(1) UNIX Programmer's Manual JOVE(1)
then waits for you type a command.
To get a list of the buffers recover knows about, use the
_l_i_s_t command. This will list all the buffers and the files
and the number of lines associated with them. Next to each
buffer is a number. When you want to recover a buffer, use
the _g_e_t command. The syntax is _g_e_t _b_u_f_f_e_r _f_i_l_e_n_a_m_e where
_b_u_f_f_e_r is either the buffer's name or the number at the
beginning of the line. If you don't type the buffer name or
the filename, recover will prompt you for them.
If there are a lot of buffers and you want to recover all of
them, use the _r_e_c_o_v_e_r command. This will recover each
buffer to the name of the buffer with ".#" prepended to the
name (so that the original isn't over-written). It asks for
each file and if you want to restore that buffer to that
name you type "yes". If you want to recover the file but to
a different name, just type the new name in. If you type
"no" recover will skip that file and go on to the next one.
If you want to look at a buffer before deciding to recover
it, use the _p_r_i_n_t command. The syntax for this is _p_r_i_n_t
_b_u_f_f_e_r where _b_u_f_f_e_r again is either its name or the number.
You can type ^C if you want to abort printing the file to
the terminal, and recover will respond with an appropriate
message.
When you're done and have all the buffers you want, type the
_q_u_i_t command to leave. You will then be asked whether it's
okay to delete the tmp files. Most of the time that's okay
and you should type "yes". When you say that, JOVE removes
all traces of those buffers and you won't be able to look at
them again. (If you recovered some buffers they will still
be around, so don't worry.) So, if you're not sure whether
you've gotten all the buffers, you should answer "no" so
that you'll be able to run recover again at a later time
(presumably after you've figured out which ones you want to
save).
If you type ^C at any time other than when you're printing a
file to the terminal, recover will exit without a word. If
you do this but wish you hadn't, just type "jove -r" to the
shell again, and you will be put back with no loss.
GETTING HELP
Once in JOVE, there are several commands available to get
help. To execute any JOVE command, you type "<ESC> X
command-name" followed by <Return>. To get a list of all
the JOVE commands you type "<ESC> X" followed by "?". The
_d_e_s_c_r_i_b_e-_b_i_n_d_i_n_g_s command can be used to get a list contain-
ing each key, and its associated command (that is, the com-
mand that gets executed when you type that key). If you
Printed 2/24/88 12 February 1986 3
JOVE(1) UNIX Programmer's Manual JOVE(1)
want to save the list of bindings, you can set the jove
variable _s_e_n_d-_t_y_p_e_o_u_t-_t_o-_b_u_f_f_e_r to ON (using the _s_e_t com-
mand), and then execute the _d_e_s_c_r_i_b_e-_b_i_n_d_i_n_g_s command. This
will create a buffer and put in it the bindings list it nor-
mally would have printed on the screen. Then you can save
that buffer to a file and print it to use as a quick refer-
ence card. (See VARIABLES below.)
Once you know the name of a command, you can find out what
it does with the _d_e_s_c_r_i_b_e-_c_o_m_m_a_n_d command, which you can
invoke quickly by typing "ESC ?". The _a_p_r_o_p_o_s command will
give you a list of all the command with a specific string in
their names. For example, if you want to know the names of
all the commands that are concerned with windows, you can
run "apropos" with the keyword _w_i_n_d_o_w.
If you're not familar with the EMACS command set, it would
be worth your while to use run TEACHJOVE. Do do that, just
type "teachjove" to your shell and you will be placed in
JOVE in a file which contains directions. I highly recom-
mend this for beginners; you may save yourself a lot of time
and headaches.
KEY BINDINGS and VARIABLES
You can alter the key bindings in JOVE to fit your personal
tastes. That is, you can change what a key does every time
you strike it. For example, by default the C-N key is bound
to the command _n_e_x_t-_l_i_n_e and so when you type it you move
down a line. If you want to change a binding or add a new
one, you use the _b_i_n_d-_t_o-_k_e_y command. The syntax is "bind-
to-key <command> key".
You can also change the way JOVE behaves in little ways by
changing the value of some variables with the _s_e_t command.
The syntax is "set <variable> value", where value is a
number or a string, or "on" or "off", depending on the con-
text. For example, if you want JOVE to make backup files,
you set the "make-backup-files" variable to "on". To see
the value of a variable, use the "print <variable>" command.
INITIALIZATION
JOVE automatically reads commands from an initialization
file in your HOME directory, called ".joverc". In this file
you can place commands that you would normally type in JOVE.
If you like to rearrange the key bindings and set some vari-
ables every time you get into JOVE, you should put them in
your initialization file. Here are a few lines from mine:
set match-regular-expressions on
auto-execute-command auto-fill /tmp/Re\|.*drft
bind-to-key i-search-forward ^\
bind-to-key i-search-reverse ^R
bind-to-key find-tag-at-point ^[^T
Printed 2/24/88 12 February 1986 4
JOVE(1) UNIX Programmer's Manual JOVE(1)
bind-to-key scroll-down ^C
bind-to-key grow-window ^Xg
bind-to-key shrink-window ^Xs
(Note that the Control Characters can be either two charac-
ter sequences (e.g. ^ and C together as ^C) or the actual
control character. If you want to use an ^ by itself you
must BackSlash it (e.g., bind-to-key grow-window ^X\^ binds
grow-window to "^X^").
SOME MINOR DETAILS
You should type C-\ instead of C-S in many instances. For
example, the way to search for a string is documented as
being "C-S" but in reality you should type "C-\". This is
because C-S is the XOFF character (what gets sent when you
type the NO SCROLL key), and clearly that won't work. The
XON character is "C-Q" (what gets sent when you type NO
SCROLL again) which is documented as the way to do a
quoted-insert. The alternate key for this is "C-^" (typed
as "C-`" on vt100's and its look-alikes). If you want to
enable C-S and C-Q and you know what you are doing, you can
put the line:
set allow-^S-and-^Q on
in your initialization file.
If your terminal has a metakey, JOVE will use it if you turn
on the "meta-key" variable. JOVE will automatically turn on
"meta-key" if the METAKEY environment variable exists. This
is useful for if you have different terminals (e.g., one at
home and one at work) and one has a metakey and the other
doesn't.
FILES
LIBDIR/.joverc - system wide initialization file
~/.joverc - personal initialization file
TMPDIR - where temporary files are stored
LIBDIR/teach-jove - the interactive tutorial
LIBDIR/portsrv - for running shells in windows (pdp11 only)
SEE ALSO
ed(1) - for a description of regular expressions
teachjove(1) - for an interactive JOVE tutorial.
DIAGNOSTICS
JOVE diagnostics are meant to be self-explanatory, but you
are advised to seek help whenever you are confused. You can
easily lose a lot of work if you don't know EXACTLY what you
are doing.
BUGS
Lines can't be more than 1024 characters long.
Searches can't cross line boundaries.
Printed 2/24/88 12 February 1986 5
JOVE(1) UNIX Programmer's Manual JOVE(1)
AUTHOR
Jonathan Payne
Printed 2/24/88 12 February 1986 6